DAM-A-48-PC AC Universal Ampermeter

DAK-72 Direct AC Ampermeter Technical Data Relay output No Current Ttransformer 5-10000 Ampere No Directly Current Ttransformer 2-100 Ampere Ok Over Current Can Be Set No Under Current Can Be Set No DEMAND No RS485 – MODBUS RTU RS485, Modbus – Rtu

The device can be used in electrical panels, laboratories and test devices. Withthe assistance of a current transformer, it measures the AC current passingthrough the system in terms of Amper unite.

■ The current transformer ratio can be adjusted between 5/5 and 10000/5 using the touch buttons on the front panel of the device.

■ Stores the maximum demand value and the peak value on its memory and keeps these values even if the energy supply goes off.

The device can be used in electrical panels, laboratories, and test devices. Withthe assistance of a current transformer, it measures the AC passingthrough the system in terms of Amper unite. After energizing the device“dA -A “ message appears on its screen for 2 seconds and then it starts toshow the current value

■ The current transformer ratio can be adjusted between 5/5 and 10000/5 usingthe touch buttons on the front panel of the device.

■ Stores the maximum demand value and the peak value on its memory andkeeps these values even if the energy supply goes off.

■ When the measured value of the seconder current reaches 5,1 A, “ OvEr”the message starts to flash on the screen to warn the user that the value of thecurrent exceeded the limit values.

General Informations  The device can be used in electrical panels, laboratories, and test devices. With the assistance of a current transformer, it measures the AC passing through the system in terms of the Amper unit. When the current exceeds the adjusted

General Informations  The device can be used in electrical panels, laboratories, and test devices. With the assistance of a current transformer, it measures the AC passing through the system in terms of the Amper unit. When the current exceeds the adjusted

The device can be used in electrical panels, laboratories, and test devices. Withthe assistance of a current transformer, it measures the AC passingthrough the system in terms of Amper unite. If the current exceeds the adjusted current then the alarm led started to blink after the the adjustedtime delay changes the output position.When the current exceeds the adjusted current value the device starts tocount for the adjusted delay time and after that, it opens its output contacts.After energizing the device, a “dA -b “ message appears on its screen for 2 seconds and then it starts to show the current value.

■ The current transformer ratio can be adjusted between 5/5 and 10000/5 using the touch buttons on the front panel of the device.

■ Stores the maximum demand value and the peak value on its memory and keeps these values even if the energy supply goes off.

■ When the measured value of the seconder current reaches 5,1 A, “ OvEr” the message starts to flash on the screen to warn the user that the value of the current exceeded the limit values.